ADLATUS CR700D

Overview

Fully autonomous floor-scrubbing robot with two 330 mm disc brushes or pads (the CR700C is the roller-brush sister model). It cleans a 700 mm path with a 750 mm pick-up width plus a side brush, carries a 60 L fresh-water and 55 L dirty-water tank and runs 4 to 6 hours per charge on a 120 Ah or 180 Ah lithium-ion battery. Navigation uses ADLATUS's own software with 2D and 3D lidar, acceleration and cliff sensors, works without Wi-Fi and records no personal data. The optional S700-2 service station charges the robot, refills fresh water and drains dirty water on its own.

Variants & pricing

Full price history

Sensors

• 2D laser (lidar) sensors
• 3D laser (lidar) sensors, 360 degree coverage
• Acceleration sensors
• Cliff detection sensors

Locomotion

wheeled, autonomous navigation (2D/3D lidar)

Use cases

industrial areas, shopping arcades, sports halls, office buildings, public facilities, car parks, healthcare, logistics

Software

SDK: ✗ · ROS: ✗ · Open source: ✗ · AI: ADLATUS Trusted Robotics platform (own navigation software)

Key facts

• Sources fetched 2026-10-17: the official CR700D + S700-2 brochure (ADLATUS_CR700D_2.0_en_kl.pdf, linked from adlatus.eu/en/download/) and the product page adlatus.eu/en/adlatus/ (shared CR700C/D page).
• Brochure dimensions: 1,267 mm long, 827 mm wide, 1,067 mm high; weight 'max. 260 kg'. A DirectIndustry listing quoted in the research brief (1,000 x 755 x 980 mm, 120/68 L tanks) does not match the brochure, so the brochure is used.
• Cleaning width 700 mm, pick-up width 750 mm plus side brush; tanks: fresh water 60 L, dirty water 55 L, detergent 2 L; theoretical area performance 2,750 m2/h, about 10,000 m2 per charge at 4 hours' operation.
• Cleaning time 4 to 6 hours per charge depending on the 120 Ah or 180 Ah lithium-ion battery; charging 1.5 to 2.5 hours; speed up to 4 km/h, adjustable. battery_hours holds the 4-hour low end (the brochure's worked example); battery voltage is not stated, so no Wh figure.
• The brochure prints a brush contact pressure of '38 bar', which is clearly a unit error, so it is not entered.
• S700-2 service station: about 70 kg, 980 x 345 x 911 mm; fills fresh water in under 10 minutes and empties waste water in under 5; needs a 3/4 in water connection at 3 to 6 bar and a 230 V socket.
• Maker is ADLATUS Robotics GmbH, Ulm, Germany. The product page and brochure state CE certification and GDPR-compliant design (no personal data recorded). No IP rating, noise level or temperature range is published.
• Image: official CR700D cut-out photo from adlatus.eu (2025/03 upload).
• weight_kg 260 is the brochure's 'max. 260 kg' with no stated condition (empty or loaded). The brochure copy also mentions roller brushes, apparently carried over from the CR700C. Software flags sdk, ros_support and open_source are false only because the schema requires a boolean; the maker states nothing, so read false as 'not documented'.

About ADLATUS Robotics

German maker of autonomous professional cleaning robots with its own navigation software and automatic service stations.

https://www.adlatus.eu · Founded: None · HQ: Ulm, Germany